Love the system so far,unfortunately the pad for supporting the unit is too short. I did call and they said that there a pad that is used with the mobile base. Haven’t heard if they sent it out as yet. Hopefully they have.

This should probably be article length. Condensed: packaging is like nothing I’ve ever seen in 65 rotations around the planet. The entire unit is HEAVY. Way heavy. Like, maybe 1/2 the weight of the saw heavy. Beautifully constructed. I adapted it to my INCA 2200 12 inch saw. It picks up that last 1% the saw leaves. Should be noted that it is paired to a 5 horse Pentz designed Clear-Vue dust collector. Gorgeous. Expensive. Does what it claims to do. Buy quality once - regret nothing.

Overall this is a high quality blade guard that also helps collect dust from the top of the saw blade. Be warned however, this is a large and heavy unit, very sturdy once in place. Adjustments are very easy to make to the well-dampened blade guard, moving up and down easily! I also like the changeable plastic side inserts, going from the straight to the bubble style depending on work type. Overall, I would purchase again, but maybe Harvey can design a less heavy or bulky guard, while still utilizing their high quality, durable build quality standards? I like using it with the Harvey Big Eye fence in the low position which creates more room to work around the large guard!

Paul

Very happy to have this system because the guard is at the ready all the time it will be always be used. I agree that the instructions could be clearer the install is not as simple as the video shows
The tolerances of the horizontal frame into the cast steel bracket is to tight it took a lot of finagling and frustration to get it installed other than that a great system

The system is well made. The installation and set-up instructions could be improved. Overall very satisfied with this purchase. I do wood working as a hobby, not a professional woodworker.

Nicely built

The SHARK S-12S is a sturdy and impressive tool that effectively reduces dust accumulation. Its swiveling feature and movable guard unit make it user-friendly, although the frame and wheel may limit visibility under the dust shroud. However, this is not a deal-breaker, as you can adjust to viewing from the side of the transparent shield. Speaking of the shield, it has saved me during one of my projects when a kickback occurred while cutting maple. The Shark S-12S took the brunt of it, and I wasn't injured. Upon close inspection, there was no noticeable damage to the Shark S-12S from the kickback.

I have an older 2hp dust collector that efficiently handles the dust produced by my table saw. However, I hope to upgrade to the Harvey GYRO AIR G-700 someday to complement the Shark S-12S system.

I also own a Harvey Alpha Table Saw equipped with a 32" INCRA TS-LS Rip Fence System. To mount the Shark S-12S onto the fence, I had to devise a secure and functional mounting solution that did not require drilling into the Incra. Fortunately, I found an alternative solution that did not compromise the integrity of the Incra.

Despite its limitations, the Shark S-12S is an excellent investment that outperforms the original dust guard. It reduces the amount of dust in the air and protects against kickbacks, making it a worthwhile purchase.

This is a nice addition to my tablesaw. However, if you want to mount this off-rail (like an out-feed table), read this first. My 52-inch Incra fence precludes mounting this to the rail.
The guard base cannot be mounted parallel to the rail. If that is done, the guard will not stop when pushed forward from the blade because the cam stops on the base are not properly aligned. There is no way to adjust the cam stops for this offset even though the mounting base is only a few inches off the fence rail. What must be done, is the base must be angled toward the blade. See the picture. If your out-feed system is solid, this works well.
I studied the manual before purchasing. Had the manual had a paragraph explaining an off-rail installation, much aggravation would have been avoided. The product is good but unless you have a straightforward on-rail installation, be prepared for some hassle.
Harvey: Your manual is not good. A link to an installation video would be most useful along with a well-written manual. Either define what to do in an off-rail installation or, better yet, make the stop cams adjustable for this situation. Again with that said, the blade guard is a good product and I would recommend it.